Blow dart gun
This project was awesome! I would rate it 10 out of 10. It is a super simple project to make,and it will work with Nerf darts. It costs about $5. (it can also shoot pop-its) :)
If you want to make you're own here are the supplies you need:
2 foot long 1/2 pvc pipe, 11/2" slip connector,(and that's it but if you want it to look cool continue reading) duct tape, wire nails, electrical tape, pool noodle, and a laser pointer.
Attach the slip connector to the pipe. Add the duct tape to the gun the long way. Tape the laser on near the end of the blow gun.
Now for the darts you need to take the party hat and a sticky note. Wrap the sticky note around the tip of the party hat. Then add hot glue in the dart, not to much , just enough to weigh it down. Now that could be it but if you are using this for target practice practice you probably want more. Well here you go... Right after you add glue put the nail tip first in the glue, keep pushing it until the head is at the tip of the dart.
And that's how you make a DIY blow gun.
I would like to thank the King of Random for this project. If you want to see how he did it on his Youtube channel here's the link.
Attach the slip connector to the pipe. Add the duct tape to the gun the long way. Tape the laser on near the end of the blow gun.
Now for the darts you need to take the party hat and a sticky note. Wrap the sticky note around the tip of the party hat. Then add hot glue in the dart, not to much , just enough to weigh it down. Now that could be it but if you are using this for target practice practice you probably want more. Well here you go... Right after you add glue put the nail tip first in the glue, keep pushing it until the head is at the tip of the dart.
And that's how you make a DIY blow gun.
I would like to thank the King of Random for this project. If you want to see how he did it on his Youtube channel here's the link.
Comments
Post a Comment